V1 Home
Ask Mike
Detector Testing V1 Moments
V1 Demo Buy V1 products Information about upgrades Getting service for your V1 V1 specifications More information





Full Coverage against radar and laser.

Includes: windshield mount; visor mount; lighter adapter; power cord, coiled; power cord, straight; direct-wire power adapter; wiring-harness connector; owner's manual; interlocking fastener; spare suction cups; spare fuse. 30-day Money-Back Guarantee.

Valentine One(R)
Radar Locator with Laser warning

Item 20015
 Price:  $399.00




New! Carrying Case for V1 Defense Gear

Made of tough, molded half-shells, cushioned on the outside with a textured, non-marring skin, and closed securely with a fine-pitch zipper. Protects V1 in its own padded dock. Room for windshield mount, visor mount, lighter adapter, and two cords. Special anti-distortion panel shields suction cups. Three mesh partitions. Full, anti-rattle liner. Fits all V1 versions. Embossed V1 logo on “top” so you know which side is up when opening. Nylon grab handle. 9.4 L x 6.3 W x 2.3 H; weighs just 10.5 oz. Black only.

Carrying Case
Item 20215
 Price:  $29.00




A big step toward privacy .

Tired of other drivers crowding up behind so they can live off your detector warnings? Or maybe you just prefer to keep a low profile. Here's a remote display that partners with V1, moving all the visual warnings to a location of your choosing while V1 continues on duty in the dark mode.

The Concealed Display may be attached directly to the Lighter Adapter (see Note below). Or you may mount it anywhere using self-stick interlocking fasteners, then connect with the power cord (included) to either the Lighter Adapter or Direct-Wire Power Adapter (both included with V1).

Mute and Mode selection are controlled by the Control Knob on the Display (On-Off and Volume adjustments remain on V1).

This compact module measures only 1.0-in. H x 2.5-in. W x 1.2-in. D. Satin-black finish matches V1.

Note: This "attachment" is not possible with the old single-wire Lighter Adapter used up through 1997. Replace with post-1997 Adapter (Item 20314) as used on today's V1.

Includes: Concealed-display module; Power cord, 8-ft.; Power cord, 3-in.; Display-module backplate (for mounting); self-stick interlocking fasteners.

Concealed Display with band identification

Item 20110
 Price:  $39.00




Motorcyclist? Headphone user?

Here's a way to move V1's audio warnings anywhere you want them. Compact module has a speaker and two headphone jacks (one mini, 3.5mm; and one micro, 2.5mm). You also get remote control of all Control Knob and Lever functions including mute and computer modes; handy when you've mounted V1 out of reach. Connects with standard V1 power cords.

Compact case measures 0.9-in. H x 2.5-in. W x 1.6-in. D.

Remote Audio Adapter
Item 20200
 Price:  $49.00




Coiled power cord
Item 20302

Power cord: coiled, 1-foot, stretches to 6 feet; Same as included with V1.
 Price:  $12.00




Coiled power cord
Item 20322

Power cord: coiled, 2-feet, stretches to 8 feet; Same as included with V1.
 Price:  $12.00




Straight power cord
Item 20311

Power cord: straight, 8-feet; Same as included with V1.
 Price:  $10.00



Straight power cord
Item 20315

Power cord: straight, 3-inch; Same as included with Concealed Display.
 Price:  $4.00



2-Port Lighter Adapter—Swivel
Item 20319

Same as the Adapter included with today’s V1; includes articulated bracket for mounting Concealed Display (Item 20110); electrically compatible with all V1’s.
 Price:  $10.00




2-Port Lighter power adapter
Item 20314

Not available; replaced by Item 20319. Fuse for Item 20314 is available—use Item 20303.
 Price:  $10.00




Lighter power adapter
Item 20304

Same as the Adapter included with early V1s; has single RJ11 connector.
 Price:  $10.00




Direct-wire power adapter
Item 20305

Same as the Adapter included with the V1; For permanent installation that draws power directly from vehicle's electrical system instead of the lighter socket.
 Price:  $13.00




Direct-wire power adapter kit
Item 00030

Direct-wire power adapter (Item 20305) and a Straight power cord (Item 20311) together at a reduced price.
 Price:  $19.00




Visor Mount
Item 20308

Same as included with V1.
 Price:  $10.00




Windshield Mount
Item 20306

Same as included with V1: includes release bar and two suction cups.
 Price:  $10.00




Suction Cups for Windshield Mount
Item 20307

Two pairs; same as currently included with V1.
 Price:  $1.00




Self-Stick Interlocking Fasteners
Item 20301

Same as included with V1.
 Price:  $1.00




Owner's Manual
Item 20309

Valentine One Owner's Manual.
 Price:  $1.00




Wiring harness connector
Item 20310

Same as included with V1.
 Price:  $1.00




2 amp. Mini Blade Fuse
Item 20321

Replacement fuse for 2-Port Lighter Adapter—Swivel (Item 20319). Not compatible with the following Lighter Adapters: Items 20314 and 20304.
 Price:  $1.00




1 amp. 5mm X 20mm Cylinder Fuse
Item 20303

Replacement fuse for Direct-Wire Power Adapter and for the following Lighter Power Adapters: Item 20314 and Item 20304.
 Price:  $1.00




Lighter Power Adapter with Mode Memory
Item 20210

Use with early V1s so detector, when switched on, starts up in the last mode selected when the unit was switched off. Use only with V1 serial numbers XXXXXX0300 to XXXXXX0399.
 Price:  $29.95




Direct-Wire Power Adapter with Mode Memory
Item 20211

Use with early V1s so detector, when switched on, starts up in the last mode selected when the unit was switched off. Also includes Fuse (Item 20303) and Wiring harness connector (Item 20310). Use only with V1 serial numbers XXXXXX0300 to XXXXXX0399.
 Price:  $29.95




Mode Memory Package
Item 00020

Item 20210 and Item 20211 together at a reduced price. Use only with V1 serial numbers XXXXXX0300 to XXXXXX0399.
 Price:  $49.95

BACK TO MORE INFO




Questions? 1-800-331-3030 toll-free
Copyright © 2004, Valentine Research, Inc.